Blog
How do I know if I have a hidden water leak?
Common signs of a hidden water leak are a water bill that rises without a change in use, a meter that moves when every tap is off, damp or bubbling paint, a lawn patch that stays wet, and musty smells. A licensed plumber can confirm the leak and locate it using thermal imaging and electronic leak detection.
Signs to watch for
- Your water bill rises and your household's water use hasn't changed.
- The water meter moves when every tap and appliance is off (see the leak check in Blog 2).
- A patch of lawn or garden stays green or soggy in dry weather.
- Paint bubbles, plaster stains or skirting boards swell.
- Mould or a musty smell keeps coming back in one spot.
- Grout or tiles crack, or one area of floor feels warm (a possible hot water pipe leak under the slab).
- You can hear running water when nothing is on.
How a leak is located
Good leak detection starts with confirming the leak, not with digging:
- Confirm it. Test at the meter, then isolate sections of the pipework to narrow down where water is being lost.
- Thermal imaging. A thermal camera shows temperature differences behind walls, floors and ceilings. Escaping water, especially hot water, often shows up as a distinct pattern.
- Electronic leak detection. Listening equipment picks up the sound of water escaping from a pressurised pipe through concrete or soil.
- CCTV drain camera. If the problem is a drain rather than a water pipe, a camera inspection shows cracks, root intrusion or displaced joints.
- Targeted repair. Once the leak is pinpointed, only the area needed is opened up for the repair.
PlumbCore uses thermal imaging, CCTV drain cameras and electronic leak detection equipment. Every leak detection comes with a written report of what we found.
Why acting early matters
Water recorded by the meter is charged whether it was used or lost. Water escaping under a slab or inside a wall cavity can also damage timber, plaster and flooring, so the cost of waiting usually grows.
Queensland requirement vs our recommendation
- Queensland requirement: repairing a leaking pipe is regulated plumbing work and must be done by a licensed plumber (QBCC).
- Who pays: pipes on the property side of the meter are generally the owner's responsibility. Some providers, including Urban Utilities, have a concealed leak policy that may reduce the bill once a licensed plumber has repaired the leak. Conditions apply.
- Our recommendation: don't wait for the next bill. If the meter is moving, book an investigation and keep records for your insurer and water provider.
FAQs
What are the signs of a hidden water leak?
A higher water bill without a change in use, a meter that moves with everything off, damp or bubbling paint, swollen skirting boards, a lawn patch that stays wet and a musty smell.
How do plumbers find hidden water leaks?
They confirm the leak at the meter, isolate sections of pipework, then use tools such as thermal imaging cameras and electronic listening equipment to pinpoint it before opening anything up.
Can a leak be found without digging up my floor?
Often, yes. Thermal imaging and electronic leak detection let a plumber narrow down the location before opening anything up. How much needs to be opened depends on where the pipe runs and how the home is built.
Is a leak under my house slab my responsibility?
Generally, yes. Pipes on the property side of the water meter, including under the slab, are usually the property owner's responsibility to repair. Your water provider can confirm the exact boundary.
Who can repair a concealed water leak in Queensland?
Repairing pipes is regulated plumbing work in Queensland, so it must be done by a licensed plumber.
Related
Think you have a hidden leak? Call PlumbCore Australia on 1300 165 358. There's no call-out fee in business hours, and our work carries an 18-month workmanship guarantee. Visit plumbcore.com.au.
